2024 Ram 2500

Complaint history

When NHTSA received these reports. Changes in reporting alone do not establish a change in failure rates.

Problems owners report

Listed groups have at least 3 complaints. The page includes the 20 largest groups plus any additional flagged groups; some complaints are not assigned to a group.

AI groups complaints by meaning; the groups are approximate. Share ratio compares the problem’s share of this vehicle’s complaints with its share on other vehicles over the last 24 months (shown from 3 recent complaints). A 2× ratio means twice the complaint share, not twice the failure risk. Flags mark unusual shares or recent surges after an AI review of the complaint content. “First signal” does not mean the pattern has persisted continuously.How recall estimates are calculated.

Recalls

• NHTSA recall #26V327000May 21, 202616 vehicles affected

  back over prevention: sensing system: camera

  Chrysler (FCA US, LLC) is recalling certain 2019 and 2023 Chrysler Pacifica, 2024 Ram 1500, Ram 2500, and 2024-2025 Jeep Wrangler vehicles. Contamination in the central vision processing module or improper programming may cause the rearview camera image not to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

  A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

  Remedy

  Dealers will update the central vision processing module software or replace the module, as necessary, free of charge. Owner notification letters are expected to be mailed beginning July 16, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 46D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on May 28, 2026.

• NHTSA recall #26V288000May 7, 202612,736 vehicles affected

  power train: automatic transmission: control module (tcm/pcm/tecm)

  Chrysler (FCA US LLC) is recalling certain 2023-2026 Ram 2500 Pick up trucks. A software error in the powertrain control module may improperly allow the vehicle speed to exceed the tire speed rating, which can result in a loss of vehicle control.

  Loss of vehicle control increases the risk of a crash.

  Remedy

  Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed May 21, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 43D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning May 14, 2026.

• NHTSA recall #24V199000March 14, 202438,164 vehicles affected

  air bags: frontal: driver clockspring/spiral cassette; steering: column

  Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2023-2024 Ram 1500, Jeep Wrangler, Jeep Wagoneer, Jeep Grand Wagoneer, Chrysler Pacifica, Ram 3500, Ram 3500 cab chassis, Ram 2500, Ram 4500 cab chassis, Ram 5500 cab chassis, 2023 Jeep Gladiator, Jeep Grand Cherokee, Jeep Grand Cherokee L, Ram 3500 Cab Chassis with a GVWR less than 10,000 lbs., and Chrysler Voyager vehicles. The steering column control module may not be welded properly, which can prevent the driver's air bag from deploying in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

  An air bag that does not deploy in a crash can increase the risk of injury.

  Remedy

  Dealers will inspect and replace the steering column control module, as necessary free of charge. Some owner notification letters were mailed April 11, 2024 through June 20, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's numbers for this recall are 14B, 33B, 34B, 35B, 36B.

• NHTSA recall #23V799000November 28, 2023185,251 vehicles affected

  exterior lighting; steering: steering control module

  Chrysler (FCA US, LLC) is recalling certain 2023 Ram 1500 Classic, Ram 3500 Classic, 3500 Cab Chassis, 2023-2024 Ram 2500, 4500/5500 Cab Chassis, and Ram 3500 vehicles. The steering column control module may cause the high beams to activate when the turn signal is used or activate the turn signal when the high beams are used. In addition, the turn signal self-canceling feature may not function properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Turn signals and/or high beams that do not function as intended may cause confusion or reduced visibility to other road users, increasing the risk of a crash.

  Remedy

  Dealers will update the steering column control module (SCCM) software, and inspect and replace the module, as necessary, free of charge. Owner notification letters were mailed December 19, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's numbers for this recall are B2A and D5A.

• NHTSA recall #23V654000September 28, 2023272,911 vehicles affected

  back over prevention: display function

  Chrysler (FCA US, LLC) is recalling certain 2022-2023 Ram 1500, Ram 3500 Cab Chassis with GVWR less than 10,000 lbs., and 2022-2024 Ram 2500 vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

  A rearview camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.

  Remedy

  Dealers will update the radio software, free of charge. Owner notification letters were mailed October 24, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 97A.

Other model years

• 2013 178
• 2014 344
• 2015 215
• 2016 259
• 2017 698
• 2018 2,607
• 2019 193
• 2020 162
• 2021 108
• 2022 181
• 2023 49
• 2024
• 2025 66
• 2026 30